1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 204Get this manual
Exhaust Housing Servicing
Removal If equipped with power trim and tilt, refer to Section for removal instructions1Remove the powerhead as described in Section 42Remove the gearcase as described in Section 6
ill which exerts considerable upward pressureRemoving the
V4 manual tilt models have tilt assist shock absorber
exhaust housing while in the down position could allow sudden release of parts which could cause serious injuryPlace motor in tilt position to relieve pressure
r:;l r:;] 3V6Remove six screws holding frame and seal assembly LJ to lower engine coverRemove two lower engine cover rear rubber mount screw and nuts, retaining lower engine cover to exhaust housing adapterRemove lower engine cover assemblyr-] 4V4Remove two lower engine cover rear rubber mount screwsretaining lower engine cover to exhaust housing adapterLift and turn lower engine cover assembly to free cover from adapter