1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 78Get this manual

1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 78

Inspection
f51 1To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms2To test solenoid valve and seat: Lightly pressurize inlet fitting with alcohol and syringe With lever in run positionno fluid should enter inlet fitting With lever in prime position both outlet fittings

should come out

f81 3To inspect or replace internal components, remove the four solenoid cover screws
19l 4When assembling solenoid, back out screws in their holes to

Back to 1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145