1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 334Get this manual
1 Installation of Cables on Engine
i from key switch and remove cap from emergency stop
"'" Prevent accidental starting of engine; always remove key
switch if boat is so equippedDisconnect battery cables at battery
1Identify the throttle cable from the shift cable at the engine end of cables by shifting control handle into FORWARDThe shift cable will move first2Lubricate the shift and throttle cable ends with OMC TripeGuard greaseShift Cable9.9, 15
1Place engine shift lever in NEUTRAL position2Check that remote control handle is in NEUTRAL position and the fast idle lever in RUN position (latched)