1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 284Get this manual
Installation 1Inspect the starter mountIf the mounts are damaged or worn, replace as follows: Remove the mount using crescent wrench Apply OMC Locquic Primer and OMC Screw Lock to threads of new mount Tighten mount securely 1201 2Install caps on starter mounts3Install the starter lockout cable into the starter housing 4Position the starter assembly onto the motorInstall the three starter housing retaining screwsThe short screw CD is installed on the port side of the starter housingTighten screws to torque of 48-72 inIbs(5,4-8 Nm)