1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 281Get this manual
Disassembly
Wear safety glasses while disassembling and assembling manual starters because of rewind spring tension
f31 1Pull the starter rope out far enough to tie slip knot in the ropePry the starter rope anchor out of the handle Remove the handle, release the slip knot, and ease the pulley back until the rewind spring if fully unwound2Remove the spindle screw nut
f51 3Remove the spindle screwspindle washerspindle ,
two spring washersand friction ring
f61 4Remove the two retaining rings CD and lift both pawls, links,
and friction plate as an assemblyRemove the spindle bushing Q) and shim 5Hold the pulley in the starter housing while turning the starter over, legs downHold fingers clear ofthe pulley and jarthe starter housing against bench to dislodge the rewind spring and pulleyCleaning and Inspection