1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 268Get this manual
23 COA3432 COA6226
Assembly
1Coat the shift rod a-ring with OMC Triple-Guard grease and install in shift rod bushing
1231 2Apply OMC Gasket Sealing Compound to the outside
diameter of the bushingInstall the bushing and washer using OMC Shift Rod Bushing Installer, PI 304515
1241 3Oil, then install new upper driveshaft bearing in the
gearcase using OMC Upper Driveshaft Bearing Installer, PIN 326564Press the bearing into the gearcase against the lettered side of the bearing and until the tool is seated on the gearcase
1251 4Install two new upper driveshaft seals back to back in the
gearcase using OMC Upper Driveshaft Seal Installer, PI 330655, attached to OMC Drive Handle, PI 378737Apply OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the gearcase and the outer seal with lip facing away from the gearcaseApply OMC Triple-Guard grease to the seal lips after installing