1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 250Get this manual
COB3047
Disassembly 1Remove the six impeller housing screws and washers2Pull up on the driveshaft and remove the driveshaft with the water pump assembly from the gearcaseDisassemble the water pump assembly from the driveshaft
03Remove the impeller plate and gasketDiscard the gasket4Remove the two propeller shaft bearing housing screws19'15Assemble the following components from OMC Universal Puller PI 378103Remove the propeller shaft bearing housing from the gearcase
PIN PIN PI CD PI Q) PI N
307636 307637 309489 307639 307638
Body Pressing Screw Screws (-20) Flat Washers Handle
i Pliers PI 331045The retaining ring is under extreme