1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 244Get this manual
32 DR2061
7Using OMC Bearing Installer PI 319931 and an arbor press, install the driveshaft bearing into the bearing sleeve with the lettered side against the tool
rail 8Using OMCBearing Installer PIN
319931, oil and install the bearing sleeve with the bearing into the gearcase with the lettered side of the bearing against the tooldriveshaft seals back to back as follows:
13211331 9Using OMCSeallnstalier PI 326554, install two new
Apply OMC Gasket Sealing Compound to the metal casing of the seals before installing Install the inner seal Q) with lip of the seal facing toward the gearcaseInstall the outer seal with lip of the seal facing away from the gearcase Apply OMC Triple-Guard grease to the seal lips after installing
10Coat the shift rod a-ring with OMC Triple-Guard grease and