1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 182Get this manual
1251 12Using tool as drawn on Page 4-9, or equivalent, push the
taper pin toward the intake manifold surfaceDo not use any tool smaller than the taper pin bore to remove the pinscrews
1261 13Remove the six main bearing screws and eight flange 127 14Turn the powerhead with the intake facing up and then
tap lightly upward on the crankshaft until the crankcase halves begin to separate15Lift the crankcase from the cylinder block