1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 178Get this manual
Powerhead Servicing, 20 thru 30 Removal
'" 1To avoid accidental starting of engine while servicing, twist and remove all spark plug leadsOn electric start models, disconnect the battery cables at the battery2Remove the manual starter as described in Section 7
f1l 3Disengage the spring from pin of the throttle control lever Remove the washer
t=J Remove the clamps from the throttle control lever
4Remove four screws from the pivot bearing clamps
f31 5Remove the pin from end of the throttle control rod Lift the armature plate link from the throttle control leverMove the throttle control lever aside6Remove the fuel pump cover Retain inside O-ring'sl 7Remove the overboard water indicator hose CD from fitting on exhaust coverRemove the hose from J-clamp1sl 8Remove the two primer hoses Q) from the carburetor and one primer hose from the intake manifoldU