1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 163Get this manual
35 ;COBl145
13511361 13Install the center main bearingApply OMC Needle
Bearing Assembly Grease to the 23 needle bearingsPlace the bearings around the center main journal of the crankshaftPlace the sleeves around the bearings with retaining ring end of the sleeves facing flywheel end of the crankshaftSecure the sleeves together with the retaining ringretainer half and bearings on each rod
1371 14Remove the rod caps from connecting rodsPlace one 1381 15Place crankshaft in position on cylinder blockAlign
center main bearing dowel pin hole with dowel pin in cylinder blockRoll the upper main bearing pin into groove of the cylinder blockPosition the rods on the crankpins at this time
1391 16Place other retainer halves and bearings on crankpins17Oil threads of rod cap screws and install both rod caps finger tight1401