1992 Johnson Evinrude "EN" 9.9 thru 30 Service Manual, P/N 508142, Page 128Get this manual
Ohmmeter TestStop Button
All ohmmeter tests must be made with the engine NOT runningcontain combination stop button
f4l 1Most steering emergency stop device
When the clip and lanyard assembly is removed, the emergency stop device is in the STOP position When the clip and lanyard assembly is installed, the emergency stop device is in the RUN position To stop the engine when the clip and lanyard assembly is in place, press inward on the button2Install the clip and lanyardCalibrate an ohmmeter on appropriate scaleConnect meter E1 leads between stop button 1-pin Amphenol connector and clean engine ground The meter must show high readingDR4097