1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 332Get this manual
COA2431
COA2433
1201 cUsing sharp screwdriver, pry the scraper out of the end
capDiscard the scraper
f211 dPry the O-ring out of the end cap using flat toolOnce the
scraper and O-ring have been removed from the end cap, the outside O-ring can be removedClean the cap thoroughlyDiscard the O-rings
1221 eOil and install new O-ring and scraper CD in the end
capThe scraper is installed with the lip facing out and can easily be pressed in with your fingers or with large flat tool in the palm of your hand
1231 fOil and install new O-ring Q) on the outside ofthe end cap1241 gUsing wire brush, clean all Locktite material from the 1251 hClean the threads on the rod with
OMC Locquic PrimerSlide the piston onto the rodPlace new small O-ring over the threads