1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 325Get this manual
Troubleshooting Trim Gauge To avoid immediate meter damage, never apply an ohmmeter to an electrical circuit where voltage is present
rv between trim gauge terminalsa"I" and "G check for voltage 1Turn key switch ON and use voltmeter to
If voltage, go to Step If no voltage, go to Step 2
rv "G" terminalswitchPoint, check for voltage between trim gauge 2With key ON and V1 If voltage, check condition of accessory harness purple 16 gauge lead If no voltage, go to Step 3
rv termmal.key switch ON, check for voltage at key switch "A" 3W!th
If voltage, check condition of remote control purple 16 gauge leads If no voltage, check condition of key switch and engine harness 20 amp fuse PIN 510884