1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 301Get this manual
1sl 5Remove the reservoir a-ring from the cylinder bodyCheck machined surfaces for nicks and scratchesf71 6Remove the plug from the cylinder bodyInspect the a-ring and the filterReplace, if necessaryf81 7Remove the four Pozidriv screws securing motor to pump manifold assemblynl 8Remove the wire shield from the pump manifoldRemove t!J the motor and inspect the motor a-ring and the a-ring on the cable connectorf101 9Remove the three Allen-head screws securing the pump manifold assembly to cylinder body [!!] 10Check machined surface on base for nicks and scratchesIndividual parts in the pump manifold assembly are not available separatelyDo not remove the pump or any control valves from the bodyDo not lose the pump driveshaft.i2l 11Remove five -rings from cylinder bodyCheck machined surfaces for nicks and scratches