1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 259Get this manual
r:t3l '" 10Lift shift and throttle plate from housingUse caution when removing shift and throttle plate as detent spring is highly compressedIt might fly out, causing personal injuryWear safety glassesr:t3l 11 Remove detent roller (h), detent shoe j), and detent
] 12Lift shift lever assembly from control1141 13To remove throttle lever assemblyremove flat-head
screw and countersunk washer from controlDiscard the patch screwLift throttle lever assembly and throttle lever spacer from control
Remove keeper plate screw Lift shift lockout cam and shift lockout lever (f) from housingRemove spring washer and fast idle lever from housing15The key switch, warning horn, neutral start switch, and emergency stop switch are serviceable, if necessaryReplace defective componentsr;:;l 16To disassemble control handle, remove two screws securing the plate to the control handle Lift neutral lock slideand slide return spring from control handleRemove screw retaining control handle knob and four screws retaining control handle cover Remove control handle knob and control handle cover from control handleTo remove trim tilt switch assembly, remove screw retaining switch to cover