1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 216Get this manual
rrJl 8Bend the inside loop of the rewind spring in toward the center of the starter housingEngage the slot of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing f181 f191 9
Place the friction plate spring washer and the friction plate on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lock ring
f191 10Be sure the starter pawl bushing is installed in the pulleyApply OMC Triple-Guard Grease or Lubriplate 777to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulleyf191 11housingthe starter housing spring in the starter
1201 12Install the starter pawl plate return spring on the starter