1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 183Get this manual
Inspection
1Inspect the throttle cable for kinks and wearReplace if necessary2Inspect the steering handle components for wear, cracks, and other damageReplace if necessary3Refer to Ignition SystemSection 3, to test the stop buttonAssembly
r:J5l 1If removed, apply Loctite Depend Adhesive to inner handle on areas shown
116l 2Install the metal outer handle over the plastic inner handle
and drive the outer handle into place1,7l 3Secure tab of the inner handle into recess of the outer handle with the steel pin1,81 4Place small braided tube with stop switch wires into large braided tube with throttle cable 5Install throttle friction control on outer handlef191 6Install the handle end of the throttle cable in the inner handleSnap the trunnion into recess in the handleInstall the retainer clip