1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 178Get this manual
28 "" 11!he star.board locknutReplace locknut if defimte resistance IS not felt1281 "" 12Torque starboard tilt tube nut to 50-54 ftIbs(68-73 Nm), then loosen nut Va to 14 turn1291 13Install the tilt cam and collar on the tilt tube1301 14Install the steering shaft and thrust washer l!!J Primer and OMC Nut Lock to the splines of the steering shaft
and lower mount bracket
r:;:;l 15Install the steering shaft keeperApply OMC Locquic
1321 16Install the lower mount bracket and new locking nut with its unstaked side facing the mount bracketAlign the bracket with the steering arm and torque the nut to 130-150 ftIbs(176-203 Nm)17Fill the swivel bracket with OMC Triple-Guard grease through the grease fitting on the bracket's port sideLubricate the tilt tube, swivel bracket, and stern brackets through the forward grease fittings18Install the exhaust housing as described in this section