1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 171Get this manual
Gl19Remove the thrust rod from the stern brackets118110Remove the stern bracket to spacer screwsport and starboardr:J7l11Remove the shock absorber pin set screw Remove the shock absorber pinRemove the shock absorber from the spacer TTL Models 1Remove one of the tilt tube nutsPull the tilt tube out of the swivel bracket assemblyIf necessary, use OMC Steering Tube Service Kit, PIN 434523Lift the swivel bracket from the stern brackets
] 2Remove the thrust rod from the stern brackets11813Remove the stern bracket to spacer screwsport and starboard
Assembly
r:;:;J 1Manual Tilt ModelsPlace the bushings in the shock absorber basePosition the shock absorber in the spacerInstall the pin through the spacer and shock absorberInstall the pin set screw in the spacer and tighten to torque of 24-26 inIbs(3-4 Nm)