1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 167Get this manual
f81 3Remove the screws from the inner exhaust housing to the adapterRemove the adapter from the inner exhaust housingRemove the water tube and seal from the inner exhaust housingMark the water tube and inner exhaust housing for correct orientation
19l 4Remove the screws from the megaphonemegaphone and discard the gasket
Remove the
101 5Check baffle and gasket condition, replace if necessaryAssembly
19l 1Clean the adapter and megaphone gasket surfacesApply
OMC Gasket Sealing Compound to both sides of new megaphone gasketPlace the gasket and megaphone on the adapterInstall the screws and tighten to torque of 60-84 inIbs17-9 Nm)
f81 2Slide the seal onto the water tube and install in the inner exhaust housingPlace the inner exhaust housing on the adapterObserve orientation mark for correct alignment and position the water tube to align it with the water pumpInstall the screws and tighten to torque of 60-84 inIbs(7-9 Nm)