1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 145Get this manual
Assembly
Proceed slowlyMake no forced assemblies unless pressing operation is called forAll internal components must be perfectly clean and lightly coated with Johnson or Evinrude Outboard LubricantINotel Use new gaskets, seals, and O-rings during assembly
rv bearingsInstall Needle Bearing the wristtopinthe 28 wrist the 1Apply OMC Grease pin the bearings in boreAlign
bearing in the bore using OMC Wrist Pin Bearing Tool, PIN 336660
f2l f31 2Place the two wrist pin thrust washers on the tool with
flat side of the washers facing out3The connecting rod has no specific orientationSupport the piston in OMC Piston Cradle, PIN 326573Oil the wrist pin bore and wrist pin4Install the wrist pin through the piston and connecting rod, pushing the tool out through the pistonDR1641