1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 71Get this manual
Disassembly All screws addressed in this procedure are No15 Torx i when removing screws and releasing that pressure
The air motor cover is under spring pressureUse caution
a No15 Torx screwdriver, remove the Torx screws holding the air motor coverTo control the spring pressure, place pump on your bench with the air motor cover facing upward Hold down on cover while removing screwsSet cover, screws, G-ring, and two springs aside
f1l With
rv intermediate housingscrewsseparate these parts.housing lift the Remove the attaching the inlet to and As you the
inlet housing, the oil piston will be drawn out of the oil pumpthe intermediate housing and air motor piston in one hand, and use the other to unscrew the fuel pistonpull gently with counterclockwise motion