1992 Johnson Evinrude "EN" 60 thru 70 Service Manual, P/N 508144, Page 40Get this manual
Synchronization and Linkage Adjustments 60, 65, 70 Remote Control fN=1lt is important that this step-by-step procedure be followed in sequence and be performed exactly as written to ensure consistent engine idling and smooth operation throughout the RPM rangefN=1 The flywheel has two timing gridsBe sure the flywheel grid that is not marked "Rope" is used for remote control model adjustmentsRemove the throttle cable from the throttle control arm and the anchor pocket beginning this procedureSet Timing Pointer If the timing pointer or intake manifold has been disturbed, check the top dead center timing pointer alignment
i ing, twist and remove all spark plug leads
1To prevent accidental starting of the engine while servic-
rv clockwise direction until the Rotate the flywheel in 2Center the timer pointer cast-in TOC mark is approximately 1112 in(4 em) past the timing pointerf21 3Install OMC Piston Stop, PI 384887, in No.1 spark plug hole and turn in center portion until it contacts the No.1 pistonLock the tool in place with ring