1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 310Get this manual
0 7Reinstall reservoir filter and plug 1sl 8With cylinder body in vise, lubricate trim pistons and push piston assemblies fully into bodyFill cylinders with OMC Power TrimlTilt and Power Steering Fluid
19l 9Screw trim cylinder end caps into cylinder bodyUse OMC
Universal Spanner Wrench, PIN 912084, to torque caps to 60-70 ft Ibs(81-95 Nm)11Ql 10Lubricate tilt cylinder piston and push assembly fully into cylinderFill cylinder with fluidf111 11Screw tilt cylinder end cap into cylinder bodyUse spanner wrench to torque cap to 58-87 ftIbs(79-118 Nm)r:J2l 12Fill reservoir with fluidPut on cap and cycle unit several times(Only tilt cylinder will retract Check fluid level with cylinders extendedRetract tilt cylinde r13Check bushings in cylinder body and replace, if worn