1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 296Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 296

r] 5Connect 12-volt source to the relay "s" terminalsUse an ohmmeter calibrated on high ohms scale or continuity light to test for continuity on relay terminals "8+" and "M" The meter must show continuityf61 6Leave the 12-volt source connected to the "s" terminalsConnect meter leads to relay terminals "8_" and "M" The meter must show no continuity7If your results vary, replace the relay

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146