1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 295Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 295

Relay Ohmmeter Tests

LJ bracket will vary from model to model, but the relay terminals= Switch (+ or -) Wire ColorBluelWhite, GreenlWhite, or Black

rl The orientation and location of the UP and DOWN relays in the

are always connected to the electrical system and trim motor as follows:

B+12 Volt (+) Battery Wire ColorRed B-12 Volt (-) Battery (Ground) Wire ColorBlack M

Wire ColorBlue or Green To protect your test light or ohmmeter, remove relays from sockets before proceeding with test1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Connect meter leads to relay terminals "B-and "M" The meter must show continuityDR3950

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146