1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 293Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 293

S DR3945

Power Supply Troubleshooting
Before beginning this procedure: Charge battery and connect battery cables Turn key switch OFF, and remove key Remove the clip from the emergency stop switchAll tests are made from the RELAY SIDE of the trimtilt relay bracket1Connect voltmeter black lead to clean engine ground2Check for voltage at battery side of starter solenoid If no voltage, check battery and wiring If voltage, go to Step (or Step 10, if problem is only with tilt downtrim in)UP CIRCUIT

3Remove relays from relay bracket
[I] 4Check for voltage at V1 (red) If no voltage, check voltage at terminal stripIf voltage at terminal strip, check wire If voltage at V1, go to Step 5

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146