1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 264Get this manual
10Lift shift and throttle plate from housingUse ill caution when removing shift and throttle plate as
detent spring is highly compressedIt might fly out, causing personal injuryWear safety glassesr:J3l 11 Remove detent roller (0, detent shoeand detent
] 12Lift shift lever assembly from control'14l 13To remove throttle lever assemblyremove flat-head screw and countersunk washer from controlDiscard the patch screwLift throttle lever assembly and throttle lever spacer from control20465
14Remove screw and locknut retaining the shift lockout cam to the fast idle leverDiscard the locknutRemove keeper plate screw Lift shift lockout cam and shift lockout lever CD from housingRemove spring washer and fast idle lever from housing
15The key switch, warning horn, neutral start switch, and emergency stop switch are serviceable, if necessaryReplace defective components
r:;:;J 16To disassemble control handle, remove two screws securing the plate to the control handle Lift neutral lock slide 6iJJ and slide return spring from control handleRemove screw retaining control handle knob and four screws retaining control handle cover Remove control handle knob and control handle cover from control handleTo remove trimtilt switch assembly, remove screw retaining switch to cover