1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 242Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 242

Installation
1Apply OMC Locquic Primer and OMC Nut Lockto the th reads of the two top starter mounting screws
1251 2Position the starter and install the mounting screwsTorque to 14-16 ftIbs(19-22 Nm)12611271 3Attach ground wire and yellowred wire from
neutral start switch to small posts on the bottom of the solenoidTighten nuts securelycable wires to large solenoid postTighten nut securely
1281 4Attach red rectifierregulator, engine cable, and power trim 129 5Attach power trim and VRO connector ground wires to

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146