1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 241Get this manual
18 24056
Assembly If removed, apply OMC Locquic Primer and OMC Screw Lock to the brush card screws before installing1Place armature in framef18l 2Apply OMC Pressure Grease to the brush holder cap armature bearing3Correctly route the brush leads and install the springs and brushesNotelncorrect orientation of thebrushes could damage the starter or cause reverse rotation f19l 4knifethe brushes and springs with modified putty
5Align and place brush holder cap firmly on armature and slide putty knife out, making sure the brushes are retained properly
1201 6Install thrust washer, and align and place end cap onto