1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 236Get this manual
Solenoid Check All engine wiring must be disconnected from the solenoid before proceeding with this test1Jl 1Calibrate ohmmeter on appropriate scaleConnect one lead to terminal and the other lead to terminal Ohmmeter should show high reading24082
If ohmmeter shows low readingreplace the solenoid r:;] 2With the ohmmeter still connected as described in Step 1, attach positive battery jumper to terminal and negative battery jumper to terminal The solenoid should close with an audible click