1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 217Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 217

Assembly r:jl 1If the reverse gate was removed during disassembly, install reverse gatebushings ,and shafts to jet housing Position shafts so holes align with holes where retaining screws make contact2Torque screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely3Place roller into cam in position shownThe roller will not assemble in any other position 13l 4
Place cam roller on reverse gate stud, and torque nut to 60-84 inIbs(7-9 Nm)

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146