1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 212Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 212

Bearing Housing Assembly Servicing 1Remove water pump assembly from jet housing
IV 2Remove four bearing housing retaining screws, and remove
bearing housing assembly from jet housing
t=J safety glasses and proceed with care to avoid unsnapping the ring from the pliers4Remove O-rings from housing and discardfJl 5Warm bearing housing with propane torch to aid in removal of upper seal carrier
'" 3Remove retaining ring with retaining ring pliersWear

INotel Do not apply too much heat as seals or carrier may be damaged
'" 6Allow bearing housing to cool until it is warm to the

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146