1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 211Get this manual
f.7l1gl 9Remove the rear screw and spacer retaining jet housing to exhaust housingRemove four screws and lock washers through the opening in the housingRemove bearing housing, driveshaft, water pump, and jet housing as an assemblyGate Removal 1Remove cam screweccentric nutand bushings
f1Ol 2Remove cam roller nut, and remove cam assembly from reverse gate armf11l 3Move roller to position shown, and remove roller from r:;:;l 4Remove screws retaining reverse gate shaftsWith punch and mallet, lightly tap shafts from housingIf forward stop is to be replaced, remove screwand remove stop and spring 5Remove reverse gate from housing, and inspect shaft bush ingsReplace if worn or damaged