1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 207Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 207

Lightly apply OMC Triple-Guard grease to new O-ringand install it on the bearing housingCarefully apply OMC Gasket Sealing Compound to both housing flanges
1261 34Vertically align the propeller shaft housing screw holes

and position the anode downward Insert the housing assembly until it seatsHold the driveshaft and rotate the propeller shaft to engage the internal splines of the two propeller shaftsPush the housing in by hand until the retaining tab slots are flush with those in the gearcase housingInstall the two retainers, washers, and screwsApply OMC Ultra Lock-271 to the threads of the two retainer screwsInstall the screws and torque them to 20-24 ftIbs(27-33 Nm)the gearcase as follows:

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146