1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 132Get this manual
1sl 7Disconnect two tilt limit switch bluewhite lead bullet connectors 19l 8Disconnect trim sender lead bullet connector and two pin
connector9Remove pin and disconnect shift rod'111 10Remove screws retaining powerhead to exhaust housing and steering arm bracket
f121 11Attach snap hooks and chain to powerheadThe chain must be minimum length of 36 in(914 mmlThe snap hooks must be capable of lifting 500 poundsHooks must not bind in cylinder block lifting eyes
"" There must be at least 18 inches of chain from each point of attachment to hoistUse suitable sized hooksHooks that are too large could bind, causing lift eyes to break and motor to drop suddenly