1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 111Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 111

Output Tests
ill plugs installed and torqued in the cylinder headIf neces-

All cranking output tests must be performed with spark

sary to remove the spark plugs, be sure to keep the spark tester away from open spark plug holes
STEP '- TOTAL OUTPUT TEST ,

'" To avoid electrical shock, do not handle ignition coils or spark tester during cranking tests
1Twist and remove all spark plug leadsr:jl 2Adjust the gap on the spark tester to 7 16 in(11 mm)Connect tester leads to the spark plug leadsSecure tester clip to clean engine ground

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146