1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 98Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 98

Installation
INot Remove any varnish from both sides of the stator retaining

e screw holesThe stator must have metal to metal contact with the cylinder block and its retaining screws
71 1Guide the connector wires through the hole in the cylinder block, align the stator roll pin with the hole in the cylinder block, and seat the stator0 2Seat grommet in hole in cylinder block
Remove old adhesive from threads of the stator screwsPrime with OMC Locquic Primer and let dryApply OMC Nut Lock to threadsInstall the screws and tighten to 120-144 inIbs(14-16 Nm)

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146