1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 96Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 96

Timing Sensor Servicing Removal

1Disconnect the timing sensor plugr:jl 2Remove the sensor support return spring from its post on the flywheel cover3Remove the two sensor support retainers
[!I 4Lift the sensor support from the flywheel cover5Remove the two screws securing the timing sensor to the sensor supportInstallation

1Install the timing sensor onto the sensor supportTighten the retaining screws to 15-20 inIbs(1 ,7-2,3 Nm)2Apply light coating of OMC Triple-Guard grease to the sliding surfaces of the sensor supportPosition the sensor support in the flywheel coverf5l 3Position the sensor support retainersInstall and tighten retainer screws

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146