1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 94Get this manual
7Remove the screws securing the spark lever retainerf71 8Pull the spark lever assembly off the throttle camshaftSwing the spark lever assembly away from the flywheel cover [!J 9Remove the flywheel coverDiscard the gasket19l 10Using Snap-on A-144 fixture, or equivalent, remove the flywheel retaining screwsDiscard the screwsr,Ql 11 Using the two 3s-24x1 inscrews from OMC Flywheel Service Kit, PIN 434649, secure the tool to the flywheelTwo of the holes in the flywheel are tapped for the toolTurn the center screw and draw the flywheel off the crankshaftTo avoid damaging the flywheel magnets, OMC Flywheel Service Kit, PIN 434649, should be your only method of removing and installing the flywheelInstallation