1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 37Get this manual

1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146, Page 37

Idle Timing
1Remove the rectifierregulator cover
rv Analyzer fromthe timing sensor plug.PIAttach the OMC Ignition 2Disconnect OMC Ignition Test Kit, 434017, to the timing
sensor3Move the analyzer selector switch to position "A"4Connect the analyzer to 12-volt source5Loosen the timer base detent screwf41 6Move both the inside and outside detent tabs completely forward on the detent plate1sl 7Be sure the timer base lever is against stop on the flywheel 1sl 8Rotate the crankshaft in clockwise direction until the timing pointer aligns with the idle timing listed in chartIdle Timing

All Models
PCE0021

Back to 1992 Johnson Evinrude "EN" 60 deg Loop V Service Manual, P/N 508146