1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143, Page 346Get this manual

1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143, Page 346

i valveTighten the valve to torque of 45-55 inIbs(5-6

29Oil and install the components ofthe manual release

Nm)1291 30Using OMCRetaining Ring Pliers, PIN 303857, install the retaining ring with sharp edge facing out1301 31Slide the rod and cap up far enough to be able to install OMC Universal Spanner Wrench, PIN 912084Fill the cylinder up to bottom of the threadsf31l 32Thread the end cap into the cylinderTorque the end cap to 56-84 ftIbs(76-114 Nm)1321 33Fill the oil reservoir up to the fill plug Install and tighten the fill plugDo not torque the plug at this time

Back to 1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143