1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143, Page 315Get this manual
1sl 6Reposition fuel manifold to make room for the routing of
EJ electrical cables7Remove fuel connector bracket and lay to the side of the lower engine cover1sl 8Route the power tilt and trim cable past starter and opening in lower cover and air silencerfJl 9Route battery cables in the same manner with the narrow side of the cable facing down
181 10Route remote control electrical harness into lower motor
coverPosition harness and connector so they will not interfere with the upper motor cover when installed
11Route the VRO tank wires along the same path 191 12Raise grommet to expose slotLeave power tilt and trim motor wire and sleeve assembly in position in the grommetr;Ql 13 Place battery cable into grommet with the flat side facing down