1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143, Page 307Get this manual
1261 '" 10Install detent roller
detent shoeand detent spring into housingTo prevent possible eye injury from detent spring, wear safety glasses while installing shift and throttle plateill
throttle plate
27 11Place spring washer onto splined hub of shift and 1281 12Be sure shift and throttle plate is cleanInstall shift and
throttle plate bushing into housingRetract detent spring and install shift and throttle plateTeeth of shift and throttle plate must engage teeth of shift lever assembly
1281 13Place neutral start switch mounting plate in positionInstall neutral start switch with two screwsTighten screws to torque of 15-20 inIbs(1,7-2,3 Nm)
1281 14Install
adjust.ment lever with friction adjustment screw mto housmg
1281 15Install retainer plate CD into housing Tighten screw to torque of 25-35 in Ibs(2,8-3,9 Nm)16Check to be sure no wires are pinchedLubricate shift lever
post and three assembly screws with OMC Triple -Guard grease