1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143, Page 264Get this manual
f17l 8Bend the inside loop ofthe rewind spring in toward the center of the starter housingEngage the slot of the pulley with the inner loop of the rewind springand install the pulley in the starter housing f18l r:J9l 9
Place the friction plate spring washer and the friction plate on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lock ring
r:J9l 10Be sure the starter pawl bushing is installed in the pulleyApply OMC Tripe-Guard grease or Lubripate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the star, er pawl in the pulleyt
hOUSing
the starter housing spring in the starter '
1201 12Install the starter pawl plate return spring on the starter
pawl plate CDPress the other end of spring on the boss of the pulleyPosition the starter pawl plate on the pulley