1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143, Page 197Get this manual
lever in the RUN positionLoosen the bellcrank setscrew Remove the tiltrun leverport stop linkand bushing from the swivel bracketRemove the starboard stop link retaining screw and nut from the swivel bracketRemove the cotter pins from the reverse lock pinsRemove the reverse lock pinsRemove the reverse lock assembly from the swivel bracket
r:J9l1201 8Place the tiltrun
12111221 9
10Refer to Cleaning and Inspection at the beginning of this sectionAssembly
Place the reverse lock spri ngs in the swivel bracketInsert the reverse lock pins in the swivel bracket and part way through the reverse lock springsPlace the reverse lock assembly between the springsPush the pins through the springs and the reverse lock assembly2Install the washers on the reverse lock pinsInstall the link spring CD on the port pinInstall the two cotter pins in the reverse lock pins3Install the bushingthe tiltrun lever in the swivel should be in the RUN positionInstall bellcrank on the tiltrun shaftTighten port stop linkand the bracketThe tiltrun lever the wave washer and the the setscrew