1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143, Page 183Get this manual
1201 6Install the throttle control plate on the outer handle7Place the throttle end cap into inner handleThe tab on the cap goes into the recess of the inner handle
122 8Push the throttle cable pin through the end of the throttle
123 9Lubricate end of pin, guides, rollers, helix grooves, and
inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and into the slots of the inner handlePlace the rollers on the ends of the roller pingrip over the helixBe sure the speed indicator is positioned with the speed rangeSnap the grip into placethe minimum slow speed position