1992 Johnson Evinrude "EN" 40 thru 55 Service Manual, P/N 508143, Page 167Get this manual
142 45Install starboard lower engine cover mount bracket and torque screws to 60-84 inIbs(7-9 Nm)46Install the complete ignition, electricaland fuel systems i and ignition wiring is routed and clamped in its original
positionInstallation
'" To prevent possible fire or explosion, make sure all electrical
1Position new powerhead gasketDo not use sealer on the gasket
rv topCoat driveshaft splines with OMChere may preventnot coat 2Moly LubeDo surface of driveshaft as lubricant seating
of driveshaft in crankshaft3Lower the powerhead assembly into placef21 4Apply OMC Gasket Sealing Compound to threads of the eight powerhead retaining screwsInstall and torque the screws to 18-20 ftIbs(25-27 Nm)f3' 5Install the exhaust housing to powerhead nutTighten the nut to 18-20 ftIbs(25-27 Nm)