1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 251Get this manual
Interlock and Shifter Bracketthru 8 Removal 1Remove the powerhead as described in Section 4
[!] 2Remove spring clip from bracketI3J 3Remove shift rod from bracket4Remove two screws retaining bracketRemove bracket
5Inspect components and replace if necessaryRemove clip rings retaining shift leverRemove pins and EJ leverInstallation 1Install shift lever, pins, and clip rings2Place bracket components in proper position and secure with screws3Place shift rod in bracket and secure with spring clip4Install powerhead as described in Section 4